BOSS HDW01718 – 3/8″ Split Lock Washer Ensure the long-term structural integrity of your BOSS snowplow and spreader systems with the Genuine BOSS HDW01718 Split Lock Washer. This essential piece of industrial-grade hardware is designed to maintain consistent tension on your fasteners, preventing the loosening caused by the intense vibrations and mechanical stress of heavy-duty snow removal. Technical Specifications & Engineering The HDW01718 is a 3/8″ split-lock (or spring-lock) washer. It is engineered with a helical design that acts as a spring, providing a constant load to the threaded fastener and increasing friction between the bolt/nut and the mounting surface. Size: 3/8 Inch (specifically designed to fit 3/8″-16 bolts like the HDW01717) Material: Heavy-Duty Steel Finish: Yellow Zinc (YZN) – This industrial plating provides superior corrosion resistance against the destructive effects of road salt, calcium chloride, and high-moisture winter environments. Type: Split Lock Washer (helical spring lock) Critical Applications in the BOSS Lineup As a standard component in the BOSS assembly catalogs, the HDW01718 is found in nearly every major equipment category: Snowplows: Used in the assembly of Power-V DXT, XT, and Straight Blade systems, particularly in the mounting of undercarriages, lift towers, and hydraulic manifolds. Spreaders: An integral part of the hopper and motor box assemblies for VBX and TGS (Tailgate Spreader) series, including the TGS 300, 600, and 1100 models. Undercarriages: Utilized in sideplate-to-frame mounting where secure, vibration-resistant fastening is mandatory for safety. Why Use Authentic BOSS Hardware? Snow removal equipment is subjected to some of the harshest mechanical conditions of any industrial machinery. Using non-OEM or standard hardware store washers can lead to premature failure or corrosion. Vibration Resistance: The specific tension of this split lock washer is calibrated to withstand the constant jarring and impact of plowing. Corrosion Protection: The Yellow Zinc coating is specifically chosen to resist rust in brine-heavy conditions, ensuring parts can be disassembled for future maintenance without snapping or seizing. Compatibility: Guaranteed to fit perfectly with other BOSS 3/8″ hardware, such as the HDW01720 Nylock Nut and HDW01717 Hex Bolt. Whether you are performing seasonal maintenance or a mid-storm repair, keeping a stock of Genuine BOSS HDW01718 Split Lock Washers ensures your equipment stays “BOSS Tough” and ready for the next event. NOTE: In the event that we do not have a BOSS Snowplow item in stock, it will be ordered from the manufacturer. Due to certain regional restrictions, the items will have to arrive here before being sent to you. Ship times will be longer during the Winter season, as demand increases considerably.
